 The most common component in installing antistatic equipment is without doubt the antistatic bar.
To choose correctly from the different types of antistatic bars it is necessary to consider the conditions and possible constraints for the installation. The efficiency of an ionizing equipment depends on the distance between the equipment and the materail surface to be discharged as well as the speed. As a general rule it can be said that by shorter distances and at moderate speeds single row bars are beeing used. With increasing speeds and distances double row bars are beeing used while finally applying blowing antistatic bars.
Blowing antistatic bars are used with great success in applications where one needs to remove unwanted particles such as dust, dirt, chips, lint, fibres etc. from material surfaces. The blowing air acts both as a carrier for charges to discharge the area and mechanically to blow the particles away from the surface.
ABAC11 Single row antistatic bar
ABAC21 double row antistatic bar
ABACA21 blowing double row antistatic bar
Blow-off nozzle
Clean room modules
|
|
